EFFECT OF TEMPERATURE ON VALVE SEALS WHEN OPERATING ON ALTERNATIVE FUELS

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F19%3A00006739" target="_blank" >RIV/46747885:24210/19:00006739 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

EFFECT OF TEMPERATURE ON VALVE SEALS WHEN OPERATING ON ALTERNATIVE FUELS

Popis výsledku v původním jazyce

The head of SI engine, in which are pressed intake and exhaust seat valves is one of the most complex part of the SI engine. There are stored in it intake and exhaust ports, spark plug, the timing mechanism and channels for cooling and lubrication. Much of the final form of this component also contributes its load, which is both thermal and mechanical. The biggest influence on deformation inserted seat valves has a temperature distribution in the cylinder head. These temperatures are influenced by many factors, including temperature and coolant flow, load and engine speed, which affect the combustion process and exhaust gas temperature (these factors in normal mode, the engine is constantly changing, therefore the thermal load valve seat is different). The paper describes the temperature measurement in hard to reach places in the cylinder head of the engine when operating on alternative fuel - namely butanol and a mixture of gasoline and compares the temperature on the valve seats when operating on alternative fuel and gasoline.

Název v anglickém jazyce

EFFECT OF TEMPERATURE ON VALVE SEALS WHEN OPERATING ON ALTERNATIVE FUELS

Popis výsledku anglicky

The head of SI engine, in which are pressed intake and exhaust seat valves is one of the most complex part of the SI engine. There are stored in it intake and exhaust ports, spark plug, the timing mechanism and channels for cooling and lubrication. Much of the final form of this component also contributes its load, which is both thermal and mechanical. The biggest influence on deformation inserted seat valves has a temperature distribution in the cylinder head. These temperatures are influenced by many factors, including temperature and coolant flow, load and engine speed, which affect the combustion process and exhaust gas temperature (these factors in normal mode, the engine is constantly changing, therefore the thermal load valve seat is different). The paper describes the temperature measurement in hard to reach places in the cylinder head of the engine when operating on alternative fuel - namely butanol and a mixture of gasoline and compares the temperature on the valve seats when operating on alternative fuel and gasoline.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

<a href="/cs/project/LO1201" target="_blank" >LO1201: ROZVOJ ÚSTAVU PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE TECHNICKÉ UNIVERZITY V LIBERCI</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017)

ISBN

978-989-98832-7-7

ISSN

—

e-ISSN

—

Počet stran výsledku

8

Strana od-do

365-372

Název nakladatele

INEGI-FEUP, RUA DR ROBERTO FRIAS, PORTO, 4200-465, PORTUGAL

Místo vydání

Albufeira, PORTUGAL

Místo konání akce

Albufeira, PORTUGAL

Datum konání akce

1. 1. 2017

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000427886600058