The impact of the deposition parameters on the mechanical properties of thin carbon layers

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24620%2F16%3A00000127" target="_blank" >RIV/46747885:24620/16:00000127 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.scopus.com/inward/record.uri?eid=2-s2.0-84970967821&partnerID=40&md5=b8b6f0e1a1e7a3c45dc45896f33d8599" target="_blank" >https://www.scopus.com/inward/record.uri?eid=2-s2.0-84970967821&partnerID=40&md5=b8b6f0e1a1e7a3c45dc45896f33d8599</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/DDF.368.95" target="_blank" >10.4028/www.scientific.net/DDF.368.95</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The impact of the deposition parameters on the mechanical properties of thin carbon layers

Popis výsledku v původním jazyce

The article describes the effect of the pressure in the chamber during the deposition of thin layers on the basic mechanical properties of thin layers based on carbon. Monitoring parameters are mainly nanohardness, coefficient of friction and adhesion between the layer and substrate. This parameters are observed using nanohardness tester and scratch tester. All observed layers had the same thickens. Carbon layers generally have poor adhesion to the substrate. To improve the adhesion, is used the interlayer of titanium which is between the substrate and carbon layer. Carbon layers are mostly used for their very good sliding properties especially in cases where can not be used process fluids or where is necessary to reduce the friction between the two materials. The carbon layer can also be used in medicine (for their biocompatibility), for machine tools (for their hardness and abrasion resistance) or as barriers layers (for their high chemical resistance)

Název v anglickém jazyce

The impact of the deposition parameters on the mechanical properties of thin carbon layers

Popis výsledku anglicky

The article describes the effect of the pressure in the chamber during the deposition of thin layers on the basic mechanical properties of thin layers based on carbon. Monitoring parameters are mainly nanohardness, coefficient of friction and adhesion between the layer and substrate. This parameters are observed using nanohardness tester and scratch tester. All observed layers had the same thickens. Carbon layers generally have poor adhesion to the substrate. To improve the adhesion, is used the interlayer of titanium which is between the substrate and carbon layer. Carbon layers are mostly used for their very good sliding properties especially in cases where can not be used process fluids or where is necessary to reduce the friction between the two materials. The carbon layer can also be used in medicine (for their biocompatibility), for machine tools (for their hardness and abrasion resistance) or as barriers layers (for their high chemical resistance)

Druh

D - Stať ve sborníku

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

<a href="/cs/project/ED0005%2F01%2F01" target="_blank" >ED0005/01/01: Centrum pro nanomateriály, pokrocilé technologie a inovace</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Defect and Diffusion Forum

ISBN

978-303835720-9

ISSN

1012-0386

e-ISSN

—

Počet stran výsledku

4

Strana od-do

95-98

Název nakladatele

Trans Tech Publications Inc.

Místo vydání

Churerstrasse 20, CH-8808 Pfaffikon, Switzerland

Místo konání akce

Liberec

Datum konání akce

1. 1. 2015

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—