Influence of Microstructural Changes in Creep Resistant Steel after Long-term Creep Tests on the Shape of the Polarization Curves

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F47718684%3A_____%2F15%3A%230000596" target="_blank" >RIV/47718684:_____/15:#0000596 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of Microstructural Changes in Creep Resistant Steel after Long-term Creep Tests on the Shape of the Polarization Curves

Popis výsledku v původním jazyce

Creep resistance of the steel depends on chemical and structural composition and structural stability. Therefore it is necessary to check microstructural changes in material during the long-term service, however the necessary material analyses are generally destructive. The submitted contribution describes non-destructive electrochemical method for detection of some microstructural changes taking place during creep exposures. The shape of polarization curves are correlated to the microstructure of CB2 steel, the most promissing (9-12) %Cr martensitic steel for the cast components. The dynamic polarization curves were measured using samples in as received conditions and after long-term creep tests at 650°C. Microstructure was analysed using light and electron microscopy. The microstructure of the CB2 steel changed during creep exposures. In polarization curves additional peak appeared in the main passivation region and the curve shape changed also in the secondary passivation region. Th

Název v anglickém jazyce

Influence of Microstructural Changes in Creep Resistant Steel after Long-term Creep Tests on the Shape of the Polarization Curves

Popis výsledku anglicky

Creep resistance of the steel depends on chemical and structural composition and structural stability. Therefore it is necessary to check microstructural changes in material during the long-term service, however the necessary material analyses are generally destructive. The submitted contribution describes non-destructive electrochemical method for detection of some microstructural changes taking place during creep exposures. The shape of polarization curves are correlated to the microstructure of CB2 steel, the most promissing (9-12) %Cr martensitic steel for the cast components. The dynamic polarization curves were measured using samples in as received conditions and after long-term creep tests at 650°C. Microstructure was analysed using light and electron microscopy. The microstructure of the CB2 steel changed during creep exposures. In polarization curves additional peak appeared in the main passivation region and the curve shape changed also in the secondary passivation region. Th

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/TE01020118" target="_blank" >TE01020118: Elektronová mikroskopie</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Key materials engineering

ISSN

1662-9795

e-ISSN

—

Svazek periodika

647

Číslo periodika v rámci svazku

2015

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

9

Strana od-do

153-161

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—