Influence of temperature on foam used in motorcycle protective equipment

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23520%2F19%3A43955968" target="_blank" >RIV/49777513:23520/19:43955968 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/49777513:23640/19:43955968

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of temperature on foam used in motorcycle protective equipment

Popis výsledku v původním jazyce

This paper researches influence of the temperature on a foam, which is used in motorcycle protective equipment. The impact test was carried out on samples, which were cut from the center part of the protector that is suitable to protect shoulder, elbow and knee areas. Its main goal was to demonstrate an effect of three different temperatures, 22, 40, and 50 °C, on the foam. Six impacts, with impact velocities 1, 2, 3, 4, 5, and 6 m·s-1, were realized for each temperature. Surfaces of the impactor and the anvil were flat. The weight of the impactor was 5.25 kg. Obtained data were evaluated and subsequently can be used for a material model identification.

Název v anglickém jazyce

Influence of temperature on foam used in motorcycle protective equipment

Popis výsledku anglicky

This paper researches influence of the temperature on a foam, which is used in motorcycle protective equipment. The impact test was carried out on samples, which were cut from the center part of the protector that is suitable to protect shoulder, elbow and knee areas. Its main goal was to demonstrate an effect of three different temperatures, 22, 40, and 50 °C, on the foam. Six impacts, with impact velocities 1, 2, 3, 4, 5, and 6 m·s-1, were realized for each temperature. Surfaces of the impactor and the anvil were flat. The weight of the impactor was 5.25 kg. Obtained data were evaluated and subsequently can be used for a material model identification.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20302 - Applied mechanics

Projekt

<a href="/cs/project/EF17_048%2F0007280" target="_blank" >EF17_048/0007280: Aplikace moderních technologií v medicíně a průmyslu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

EAN 2019 - Conference Proceedings 2019

ISBN

978-80-214-5766-9

ISSN

—

e-ISSN

—

Počet stran výsledku

7

Strana od-do

202-208

Název nakladatele

Czech Society for Mechanics

Místo vydání

Brno

Místo konání akce

Luhačovice

Datum konání akce

3. 6. 2019

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—