Formation of thin-film crystalline silicon on glass observed by in-situ XRD

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23640%2F10%3A00503276" target="_blank" >RIV/49777513:23640/10:00503276 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Formation of thin-film crystalline silicon on glass observed by in-situ XRD

Popis výsledku v původním jazyce

Thin-film poly-crystalline silicon (poly c-Si) on glass obtained by crystallization of an amorphous silicon (a-Si) film is a promising material for low cost, high efficiency solar cells. Our approach to obtain this material is to crystallize a-Si films on glass by solid phase crystallization (SPC). As the grain size of SPC poly c-Si films will be smaller than that of multi-crystalline wafers, lower solar cell efficiencies are expected for this technology. Despite the smaller grain size, a 2-micron-thickpolycrystalline silicon solar cell with light trapping was shown to have a conversion efficiency of more than 10% [1]. Obtainable efficiencies up to 15% are expected for solar cells made using SPC of a-Si:H films. Expanding thermal plasma chemical vapordeposition (ETP-CVD) was used to prepare hydrogenated a-Si films; this technique is chosen because the deposition rates are much higher than with plasma enhanced CVD. A-Si:H films with different hydrogen contents were annealed using temp

Název v anglickém jazyce

Formation of thin-film crystalline silicon on glass observed by in-situ XRD

Popis výsledku anglicky

Thin-film poly-crystalline silicon (poly c-Si) on glass obtained by crystallization of an amorphous silicon (a-Si) film is a promising material for low cost, high efficiency solar cells. Our approach to obtain this material is to crystallize a-Si films on glass by solid phase crystallization (SPC). As the grain size of SPC poly c-Si films will be smaller than that of multi-crystalline wafers, lower solar cell efficiencies are expected for this technology. Despite the smaller grain size, a 2-micron-thickpolycrystalline silicon solar cell with light trapping was shown to have a conversion efficiency of more than 10% [1]. Obtainable efficiencies up to 15% are expected for solar cells made using SPC of a-Si:H films. Expanding thermal plasma chemical vapordeposition (ETP-CVD) was used to prepare hydrogenated a-Si films; this technique is chosen because the deposition rates are much higher than with plasma enhanced CVD. A-Si:H films with different hydrogen contents were annealed using temp

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

BM - Fyzika pevných látek a magnetismus

OECD FORD obor

—

Projekt

<a href="/cs/project/1M06031" target="_blank" >1M06031: Materiály a komponenty pro ochranu životního prostředí</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Energy Procedia

ISSN

1876-6102

e-ISSN

—

Svazek periodika

2

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

7

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—