Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F14%3A63140" target="_blank" >RIV/60460709:41320/14:63140 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood

Popis výsledku v původním jazyce

This paper deals with splinter size analysis of beech wood, considering the angular tool of the cutter and also the physical and mechanical wood properties substantially influencing wood processing technology. Particle size analysis was conducted by sieving the samples using a set of laboratory sieves, with subsequent determination of the individual fraction shares. The results have been compared with respect to the possibility of wood waste separation and filtration, and its subsequent utilization, above all, in the production of agglomerated materials and production of wood briquettes and pellets. The most frequently occurring fractions in native beech samples range between 5 and 8 mm and between 2 and 5 mm, while powder fractions below 125 ?m were found in less than 1% of investigated samples. The most frequently occurring fractions in thermally modified beech wood ranged from 0.5 to 1 mm, and the share of powder wood particles below 125 ?m was less than 4%.

Název v anglickém jazyce

Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood

Popis výsledku anglicky

This paper deals with splinter size analysis of beech wood, considering the angular tool of the cutter and also the physical and mechanical wood properties substantially influencing wood processing technology. Particle size analysis was conducted by sieving the samples using a set of laboratory sieves, with subsequent determination of the individual fraction shares. The results have been compared with respect to the possibility of wood waste separation and filtration, and its subsequent utilization, above all, in the production of agglomerated materials and production of wood briquettes and pellets. The most frequently occurring fractions in native beech samples range between 5 and 8 mm and between 2 and 5 mm, while powder fractions below 125 ?m were found in less than 1% of investigated samples. The most frequently occurring fractions in thermally modified beech wood ranged from 0.5 to 1 mm, and the share of powder wood particles below 125 ?m was less than 4%.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JP - Průmyslové procesy a zpracování

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

BioResources

ISSN

1930-2126

e-ISSN

—

Svazek periodika

9

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

15

Strana od-do

1346-1360

Kód UT WoS článku

000331996500106

EID výsledku v databázi Scopus

—