Effect of thermal treatment on surface quality of beech wood after plane milling

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F15%3A67335" target="_blank" >RIV/60460709:41320/15:67335 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.15376/biores.10.3.4226-4238" target="_blank" >http://dx.doi.org/10.15376/biores.10.3.4226-4238</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.15376/biores.10.3.4226-4238" target="_blank" >10.15376/biores.10.3.4226-4238</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of thermal treatment on surface quality of beech wood after plane milling

Popis výsledku v původním jazyce

This paper deals with the determination of the surface quality of both thermally treated and thermally untreated wood after the plane milling process. The milled surface quality was evaluated on the basis of the arithmetical mean deviation of the assessed profile, Ra. Surface quality measurements were carried out for various milling process parameters, such as tool clearance angles of 15o, 20o, and 25o, cutting speeds of 20, 30, and 40 m/s, and feed speeds of 4, 8, and 11 m/min. A splinter with a uniform thickness of 1 mm was removed from the wood through milling. Based on the results, it can be stated that thermal treatment of wood has no statistically significant impact on roughness. The most significant impact of the monitored factors were associated with feed speed, clearance angle, and cutting speed. The lowest average roughness values were found at 20o clearance angles, a feed speed of 4 m/min, and a cutting speed of 40 m/s. Increases in cutting speed led to a decrease in average

Název v anglickém jazyce

Effect of thermal treatment on surface quality of beech wood after plane milling

Popis výsledku anglicky

This paper deals with the determination of the surface quality of both thermally treated and thermally untreated wood after the plane milling process. The milled surface quality was evaluated on the basis of the arithmetical mean deviation of the assessed profile, Ra. Surface quality measurements were carried out for various milling process parameters, such as tool clearance angles of 15o, 20o, and 25o, cutting speeds of 20, 30, and 40 m/s, and feed speeds of 4, 8, and 11 m/min. A splinter with a uniform thickness of 1 mm was removed from the wood through milling. Based on the results, it can be stated that thermal treatment of wood has no statistically significant impact on roughness. The most significant impact of the monitored factors were associated with feed speed, clearance angle, and cutting speed. The lowest average roughness values were found at 20o clearance angles, a feed speed of 4 m/min, and a cutting speed of 40 m/s. Increases in cutting speed led to a decrease in average

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JP - Průmyslové procesy a zpracování

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

BioResources

ISSN

1930-2126

e-ISSN

—

Svazek periodika

10

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

13

Strana od-do

4226-4238

Kód UT WoS článku

000364199800033

EID výsledku v databázi Scopus

—