Determination of the Bending Moment of a Dowel and Tenon Joint on Window Profile IV 92 of a Wooden Window

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F17%3A74920" target="_blank" >RIV/60460709:41320/17:74920 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.15376/biores.12.2.4202-4213" target="_blank" >http://dx.doi.org/10.15376/biores.12.2.4202-4213</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.15376/biores.12.2.4202-4213" target="_blank" >10.15376/biores.12.2.4202-4213</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Determination of the Bending Moment of a Dowel and Tenon Joint on Window Profile IV 92 of a Wooden Window

Popis výsledku v původním jazyce

This study deals with calculating and comparing the bending moments of two types of corner joints for commercially produced wooden sashes. The triple tenon and mortise joint was compared to a dowel joint on the sash of a window profile IV 92, made of spruce glued laminated timber. On the testing machine, the maximum force in the angular plane of a window sash under compression or tension mode was applied, and the measured values were converted to the bending moments. A significant difference between the bending moments for the mortise and tenon joint, and dowel joint were determined. The dowel joints achieved 167 Nm in a tensile test and 168 Nm in a compression test, while the mortise and tenon joint achieved 344 Nm in a tensile test and 325 Nm in a compression test. However, a significant difference was not revealed between the compression and tension tests for both types of joints. The differences for both types of joints were explained via the different sizes of the bonded surfaces, which was high

Název v anglickém jazyce

Determination of the Bending Moment of a Dowel and Tenon Joint on Window Profile IV 92 of a Wooden Window

Popis výsledku anglicky

This study deals with calculating and comparing the bending moments of two types of corner joints for commercially produced wooden sashes. The triple tenon and mortise joint was compared to a dowel joint on the sash of a window profile IV 92, made of spruce glued laminated timber. On the testing machine, the maximum force in the angular plane of a window sash under compression or tension mode was applied, and the measured values were converted to the bending moments. A significant difference between the bending moments for the mortise and tenon joint, and dowel joint were determined. The dowel joints achieved 167 Nm in a tensile test and 168 Nm in a compression test, while the mortise and tenon joint achieved 344 Nm in a tensile test and 325 Nm in a compression test. However, a significant difference was not revealed between the compression and tension tests for both types of joints. The differences for both types of joints were explained via the different sizes of the bonded surfaces, which was high

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20502 - Paper and wood

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

BioResources

ISSN

1930-2126

e-ISSN

—

Svazek periodika

12

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

12

Strana od-do

4202-4213

Kód UT WoS článku

000402883700142

EID výsledku v databázi Scopus

2-s2.0-85018922332