Enhancing Data Collection Through Optimization of Laser Line Triangulation Sensor Settings and Positioning

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F25%3A10258414" target="_blank" >RIV/61989100:27230/25:10258414 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.3390/s25061772" target="_blank" >https://doi.org/10.3390/s25061772</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/s25061772" target="_blank" >10.3390/s25061772</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Enhancing Data Collection Through Optimization of Laser Line Triangulation Sensor Settings and Positioning

Popis výsledku v původním jazyce

This study proposes a new approach to improving laser sensor data collection through optimised sensor settings. Specifically, it examines the influence of laser sensor configurations on laser scanning measurements obtained by using a laser line triangulation sensor for transparent and non-transparent plastics, as well as aluminium alloys. Distance data were acquired with a three-degree-of-freedom positioning device and the laser sensor under both manual and automatic settings. Measurements were performed at the sensor’s reference distance and across a wide range of positional configurations. The results of extensive experimental tests highlight optimal sensor configurations for various materials and sensor orientations relative to the scanned surface, including both in-plane and out-of-plane angles, to enhance the reliability and accuracy of distance data collection. © 2025 by the authors.

Název v anglickém jazyce

Enhancing Data Collection Through Optimization of Laser Line Triangulation Sensor Settings and Positioning

Popis výsledku anglicky

This study proposes a new approach to improving laser sensor data collection through optimised sensor settings. Specifically, it examines the influence of laser sensor configurations on laser scanning measurements obtained by using a laser line triangulation sensor for transparent and non-transparent plastics, as well as aluminium alloys. Distance data were acquired with a three-degree-of-freedom positioning device and the laser sensor under both manual and automatic settings. Measurements were performed at the sensor’s reference distance and across a wide range of positional configurations. The results of extensive experimental tests highlight optimal sensor configurations for various materials and sensor orientations relative to the scanned surface, including both in-plane and out-of-plane angles, to enhance the reliability and accuracy of distance data collection. © 2025 by the authors.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

<a href="/cs/project/EH22_008%2F0004631" target="_blank" >EH22_008/0004631: Materiály a technologie pro udržitelný rozvoj</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2025

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Sensors

ISSN

1424-8220

e-ISSN

—

Svazek periodika

25

Číslo periodika v rámci svazku

6

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

20

Strana od-do

1424-8220

Kód UT WoS článku

001453959100001

EID výsledku v databázi Scopus

2-s2.0-105001096065