Measurements of Flat-Plate Milk Coolers

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43210%2F14%3A00228539" target="_blank" >RIV/62156489:43210/14:00228539 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.11118/actaun201462051057" target="_blank" >http://dx.doi.org/10.11118/actaun201462051057</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.11118/actaun201462051057" target="_blank" >10.11118/actaun201462051057</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Measurements of Flat-Plate Milk Coolers

Popis výsledku v původním jazyce

Measuring in laboratory conditions was performed with the aim to collect a sufficient quantity of measured data for the qualified application of flat-plate coolers in measuring under real operating conditions. The operating measurement was carried out onthe basis of the results of laboratory measurements. The objective was to determine to what extent the use of flat-plate coolers under specific conditions results in cost reduction and improved milk cooling process. The measurement was performed in several cycles. The first measurement took place in the existing system without the use of the flat-plate cooler. The volume of drawn milk was monitored throughout the milking process along with its temperature, temperature in the tank and electricity consumption of the cooling system. At the second stage, the flat-plate cooler was introduced into the cooling process, which was followed by monitoring the milk and cooling water volume, their temperature, temperature in the tank and electricit

Název v anglickém jazyce

Measurements of Flat-Plate Milk Coolers

Popis výsledku anglicky

Measuring in laboratory conditions was performed with the aim to collect a sufficient quantity of measured data for the qualified application of flat-plate coolers in measuring under real operating conditions. The operating measurement was carried out onthe basis of the results of laboratory measurements. The objective was to determine to what extent the use of flat-plate coolers under specific conditions results in cost reduction and improved milk cooling process. The measurement was performed in several cycles. The first measurement took place in the existing system without the use of the flat-plate cooler. The volume of drawn milk was monitored throughout the milking process along with its temperature, temperature in the tank and electricity consumption of the cooling system. At the second stage, the flat-plate cooler was introduced into the cooling process, which was followed by monitoring the milk and cooling water volume, their temperature, temperature in the tank and electricit

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

GB - Zemědělské stroje a stavby

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis

ISSN

1211-8516

e-ISSN

—

Svazek periodika

62

Číslo periodika v rámci svazku

5

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

8

Strana od-do

1057-1064

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—