Creep in NiAl-Mo Eutectics

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F11%3A00376019" target="_blank" >RIV/68081723:_____/11:00376019 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Creep in NiAl-Mo Eutectics

Popis výsledku v původním jazyce

We report on creep in NiAl-Mo ternary eutectic and NiAl intermetallic, having respective nominal compositions Ni-45.5Al-9Mo and Ni-45.2Al (at.%). These alloys were directionally solidified in a high-temperature optical floating zone furnace. The eutecticalloy exhibited a well-aligned rod-like microstructure, consisting of NiAl matrix and 14% (by volume) continuous Mo-fibres oriented along a [001]-crystal growth direction. Cylindrical [001]-oriented specimens were loaded in compression at temperatures in a range 1073 ? 1173 K. Formidable strengthening by regularly distributed fine fibres (typical diameter, 400 nm) was observed which resulted in minimum creep rates of the NiAl-Mo eutectic that were seven orders of magnitude lower than the correspondingminimum creep rates of the NiAl matrix. Preliminary microstructural investigations suggested that the strengthening effect is due to an interaction between Mo fibres and subgrain boundaries that form in the course of creep. This interacti

Název v anglickém jazyce

Creep in NiAl-Mo Eutectics

Popis výsledku anglicky

We report on creep in NiAl-Mo ternary eutectic and NiAl intermetallic, having respective nominal compositions Ni-45.5Al-9Mo and Ni-45.2Al (at.%). These alloys were directionally solidified in a high-temperature optical floating zone furnace. The eutecticalloy exhibited a well-aligned rod-like microstructure, consisting of NiAl matrix and 14% (by volume) continuous Mo-fibres oriented along a [001]-crystal growth direction. Cylindrical [001]-oriented specimens were loaded in compression at temperatures in a range 1073 ? 1173 K. Formidable strengthening by regularly distributed fine fibres (typical diameter, 400 nm) was observed which resulted in minimum creep rates of the NiAl-Mo eutectic that were seven orders of magnitude lower than the correspondingminimum creep rates of the NiAl matrix. Preliminary microstructural investigations suggested that the strengthening effect is due to an interaction between Mo fibres and subgrain boundaries that form in the course of creep. This interacti

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/GA202%2F09%2F2073" target="_blank" >GA202/09/2073: Deformační mechanismy in-situ kompozitních materiálů</a><br>

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

METAL 2011 Conference Proceedings

ISBN

978-80-87294-22-2

ISSN

—

e-ISSN

—

Počet stran výsledku

5

Strana od-do

"paper no. 926"

Název nakladatele

TANGER, spol. s r.o.

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

18. 5. 2011

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—