Effect of the load eccentricity on fracture behaviour of cementitious materials subjected to the modified compact tension test

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F17%3A00479054" target="_blank" >RIV/68081723:_____/17:00479054 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.4028/www.scientific.net/SSP.258.518" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/SSP.258.518</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/SSP.258.518" target="_blank" >10.4028/www.scientific.net/SSP.258.518</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of the load eccentricity on fracture behaviour of cementitious materials subjected to the modified compact tension test

Popis výsledku v původním jazyce

Fracture properties of quasi-brittle cementitious composites are typically determined from the load–displacement response recorded during a fracture test by using the work-of-fracture method or possibly other relevant fracture models. Our contribution is focused on a set of experimental tests which are used to study the fracture behaviour on notched dog-bone-shaped specimens made of cementitious materials. These specimens are subjected to modified compact tension (ModCT) test under a specific range of eccentricity of the tensile load. This type of test generates a stress state in the specimen ligament which combines a direct tension with a defined level of bending due to eccentricity of the tensile load. Several values of relative notch length are also considered. While the crack propagates, a variety of stress states, resulting in variations in the crack-tip stress and deformation constraint, appears in the ligament zone because of the changes in the eccentricity of the applied load, which influences the fracture behaviour of the investigated specimens. The K-calibration, T-stress, CMOD and COD curves for ModCT specimens are introduced and variations of these curves with varying load eccentricity are discussed.

Název v anglickém jazyce

Effect of the load eccentricity on fracture behaviour of cementitious materials subjected to the modified compact tension test

Popis výsledku anglicky

Fracture properties of quasi-brittle cementitious composites are typically determined from the load–displacement response recorded during a fracture test by using the work-of-fracture method or possibly other relevant fracture models. Our contribution is focused on a set of experimental tests which are used to study the fracture behaviour on notched dog-bone-shaped specimens made of cementitious materials. These specimens are subjected to modified compact tension (ModCT) test under a specific range of eccentricity of the tensile load. This type of test generates a stress state in the specimen ligament which combines a direct tension with a defined level of bending due to eccentricity of the tensile load. Several values of relative notch length are also considered. While the crack propagates, a variety of stress states, resulting in variations in the crack-tip stress and deformation constraint, appears in the ligament zone because of the changes in the eccentricity of the applied load, which influences the fracture behaviour of the investigated specimens. The K-calibration, T-stress, CMOD and COD curves for ModCT specimens are introduced and variations of these curves with varying load eccentricity are discussed.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20306 - Audio engineering, reliability analysis

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Materials Structure & Micromechanics of Fracture VIII

ISBN

978-3-03835-626-4

ISSN

1662-9779

e-ISSN

—

Počet stran výsledku

4

Strana od-do

518-521

Název nakladatele

Trans Tech Publications

Místo vydání

Zürrich

Místo konání akce

Brno

Datum konání akce

27. 6. 2016

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—