Preliminary Testing of Production Thin-Walled Ribs into Aluminum Alloy AW6060 Using the Abrasive Water Jet

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68145535%3A_____%2F21%3A00559383" target="_blank" >RIV/68145535:_____/21:00559383 - isvavai.cz</a>

Výsledek na webu

<a href="https://link.springer.com/chapter/10.1007/978-3-030-71956-2_7" target="_blank" >https://link.springer.com/chapter/10.1007/978-3-030-71956-2_7</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1007/978-3-030-71956-2_7" target="_blank" >10.1007/978-3-030-71956-2_7</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Preliminary Testing of Production Thin-Walled Ribs into Aluminum Alloy AW6060 Using the Abrasive Water Jet

Popis výsledku v původním jazyce

Nowadays is placed great emphasis on miniaturization and reduction of weight in many industrial sectors. Application of abrasive water jet to produce thin-walled components hide big potential for future applications, due to small lateral force and absence of heat-affected zone. The presented article is focused on the possibility of creating thin-walled ribs using an abrasive water jet. An experimental procedure was selected to produce the thinnest possible rib in aluminum alloy AW 6060. Ribs were created by two passes of the AWJ with changing of the pitch between two passes. Due to minimal lateral force in the process as possible to create a rib with an average width of 0.4 mm with a height, more than 8 mm Metallography analysis was performed for a closer look on the subsurface layers of the created rib and root of the rib. Results have the potential to extend knowledge in the field of abrasive water jet machining of thin-walled components.

Název v anglickém jazyce

Preliminary Testing of Production Thin-Walled Ribs into Aluminum Alloy AW6060 Using the Abrasive Water Jet

Popis výsledku anglicky

Nowadays is placed great emphasis on miniaturization and reduction of weight in many industrial sectors. Application of abrasive water jet to produce thin-walled components hide big potential for future applications, due to small lateral force and absence of heat-affected zone. The presented article is focused on the possibility of creating thin-walled ribs using an abrasive water jet. An experimental procedure was selected to produce the thinnest possible rib in aluminum alloy AW 6060. Ribs were created by two passes of the AWJ with changing of the pitch between two passes. Due to minimal lateral force in the process as possible to create a rib with an average width of 0.4 mm with a height, more than 8 mm Metallography analysis was performed for a closer look on the subsurface layers of the created rib and root of the rib. Results have the potential to extend knowledge in the field of abrasive water jet machining of thin-walled components.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Advances in Manufacturing Engineering and Materials II

ISBN

978-3-030-71955-5

ISSN

—

e-ISSN

—

Počet stran výsledku

12

Strana od-do

75-86

Název nakladatele

Springer

Místo vydání

Cham

Místo konání akce

Nový Smokovec

Datum konání akce

21. 6. 2021

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000784583400007