Assessment of the mechanical behavior of bonded glass-to-glass transparent epoxy adhesive joint at elevated temperatures for load-bearing elements

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F23%3A00369356" target="_blank" >RIV/68407700:21110/23:00369356 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1016/j.ijadhadh.2023.103526" target="_blank" >https://doi.org/10.1016/j.ijadhadh.2023.103526</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.ijadhadh.2023.103526" target="_blank" >10.1016/j.ijadhadh.2023.103526</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Assessment of the mechanical behavior of bonded glass-to-glass transparent epoxy adhesive joint at elevated temperatures for load-bearing elements

Popis výsledku v původním jazyce

In this paper, an experimental program was conducted to evaluate the performance of transparent bonded glass joints with epoxy resin over a wide range of temperatures. Tensile and shear tests were performed on bulk-cured adhesive samples and bonded glass-to-glass block shear specimens respectively, at room temperature (RT), 40, 60, and 80 °C. The differences in surface characteristics such as roughness, wettability, and surface free energy (SFE) between both glass sides were examined. The results showed that tensile and shear strengths decreased with increasing temperatures. Furthermore, the shear strength was influenced by the surface properties of the glass sides.

Název v anglickém jazyce

Assessment of the mechanical behavior of bonded glass-to-glass transparent epoxy adhesive joint at elevated temperatures for load-bearing elements

Popis výsledku anglicky

In this paper, an experimental program was conducted to evaluate the performance of transparent bonded glass joints with epoxy resin over a wide range of temperatures. Tensile and shear tests were performed on bulk-cured adhesive samples and bonded glass-to-glass block shear specimens respectively, at room temperature (RT), 40, 60, and 80 °C. The differences in surface characteristics such as roughness, wettability, and surface free energy (SFE) between both glass sides were examined. The results showed that tensile and shear strengths decreased with increasing temperatures. Furthermore, the shear strength was influenced by the surface properties of the glass sides.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

<a href="/cs/project/GA23-06016S" target="_blank" >GA23-06016S: Povrchová úprava skla a její vliv na spolehlivost lepených spojů pro skleněné konstrukce za zvýšené teploty</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

International Journal of Adhesion and Adhesives

ISSN

0143-7496

e-ISSN

1879-0127

Svazek periodika

127

Číslo periodika v rámci svazku

říjen

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

13

Strana od-do

—

Kód UT WoS článku

001090979200001

EID výsledku v databázi Scopus

2-s2.0-85173262239