Experimental Tests of White UHPC Plates Reinforced by PVA Fibres and Textile Glass Reinforcement

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21610%2F15%3A00233957" target="_blank" >RIV/68407700:21610/15:00233957 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMR.1124.83" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/AMR.1124.83</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMR.1124.83" target="_blank" >10.4028/www.scientific.net/AMR.1124.83</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Experimental Tests of White UHPC Plates Reinforced by PVA Fibres and Textile Glass Reinforcement

Popis výsledku v původním jazyce

The paper is dealing with the development of thin slabs made from white Ultra-High Performance Concrete (UHPC), which can be used as facade or roof panels. The slabs were designed with reinforcement realized by randomly dispersed polyvinylalcohol (PVA) fibres and a textile glass 2D net with mesh 20 x 20 mm. The used 2D reinforcement (AR - Glass with 2400 TEX fineness) was coated to became resistant to alkaline environment. Three slab specimens with size of 750 x 125 x 15 mm were prepared and tested in four-point bending. The courses of the tests were continually monitored by an automatic measuring unit. The acting force, the deformation in the middle of the span, the deformation in the supports and the progressive formation and development of cracks were detected. The numeric model was created in 3D surroundings of Gid 2011 program and then converted into ATENA software. There was found an efficient correspondence between the results of the numerical analysis and the experimental tests

Název v anglickém jazyce

Experimental Tests of White UHPC Plates Reinforced by PVA Fibres and Textile Glass Reinforcement

Popis výsledku anglicky

The paper is dealing with the development of thin slabs made from white Ultra-High Performance Concrete (UHPC), which can be used as facade or roof panels. The slabs were designed with reinforcement realized by randomly dispersed polyvinylalcohol (PVA) fibres and a textile glass 2D net with mesh 20 x 20 mm. The used 2D reinforcement (AR - Glass with 2400 TEX fineness) was coated to became resistant to alkaline environment. Three slab specimens with size of 750 x 125 x 15 mm were prepared and tested in four-point bending. The courses of the tests were continually monitored by an automatic measuring unit. The acting force, the deformation in the middle of the span, the deformation in the supports and the progressive formation and development of cracks were detected. The numeric model was created in 3D surroundings of Gid 2011 program and then converted into ATENA software. There was found an efficient correspondence between the results of the numerical analysis and the experimental tests

Druh

D - Stať ve sborníku

CEP obor

JM - Inženýrské stavitelství

OECD FORD obor

—

Projekt

<a href="/cs/project/GA13-12676S" target="_blank" >GA13-12676S: Pokročilý výzkum UHPC matrice pro ultra tenké prvky s nekonvenční výztuží</a><br>

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Ecological and New Building Materials and Products 2015

ISBN

978-3-03835-587-8

ISSN

1662-8985

e-ISSN

—

Počet stran výsledku

6

Strana od-do

83-88

Název nakladatele

TRANS TECH PUBLICATIONS LTD

Místo vydání

ZURICH

Místo konání akce

Černá Hora

Datum konání akce

2. 6. 2015

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—