Experimental Tests of White UHPC Plates Reinforced PVA Fibres and Textile Glass Reinforcement
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21610%2F15%3A00233963" target="_blank" >RIV/68407700:21610/15:00233963 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Experimental Tests of White UHPC Plates Reinforced PVA Fibres and Textile Glass Reinforcement
Popis výsledku v původním jazyce
The paper is about a research focused on a development of thin slabs made from white UHPC. These slabs are reinforced by scattered PVA fibres and textile glass reinforcement in form of 2D net. The aim of the experiment is the development of tin slabs that can be used as facade or roof panels. The course of the experimental tests of these slabs and its correspondence with the numeric analysis made with ATHENA software is in the paper. Three slab specimens with size of 750 x 125 x 15 mm were tested in four-point bending. The white UHPC matrix was reinforced by the scattered PVA fibres and the 2D textile glass reinforcement with mesh 20 x 20 mm. The used 2D reinforcement was coated against alkali conditions, so called AR - Glass with 2400 TEX fineness. The reinforcement was placed and fixed near the lower surface of the slabs. The course of the tests was continually monitored by an automatic measuring unit where especially the acting force, the deformation in the middle of the span, the d
Název v anglickém jazyce
Experimental Tests of White UHPC Plates Reinforced PVA Fibres and Textile Glass Reinforcement
Popis výsledku anglicky
The paper is about a research focused on a development of thin slabs made from white UHPC. These slabs are reinforced by scattered PVA fibres and textile glass reinforcement in form of 2D net. The aim of the experiment is the development of tin slabs that can be used as facade or roof panels. The course of the experimental tests of these slabs and its correspondence with the numeric analysis made with ATHENA software is in the paper. Three slab specimens with size of 750 x 125 x 15 mm were tested in four-point bending. The white UHPC matrix was reinforced by the scattered PVA fibres and the 2D textile glass reinforcement with mesh 20 x 20 mm. The used 2D reinforcement was coated against alkali conditions, so called AR - Glass with 2400 TEX fineness. The reinforcement was placed and fixed near the lower surface of the slabs. The course of the tests was continually monitored by an automatic measuring unit where especially the acting force, the deformation in the middle of the span, the d
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JM - Inženýrské stavitelství
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/GA13-12676S" target="_blank" >GA13-12676S: Pokročilý výzkum UHPC matrice pro ultra tenké prvky s nekonvenční výztuží</a><br>
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2015
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Ekologie a nové stavební hmoty a výrobky
ISBN
978-80-87397-19-0
ISSN
—
e-ISSN
—
Počet stran výsledku
6
Strana od-do
—
Název nakladatele
Výzkumný ústav stavebních hmot, a.s.
Místo vydání
Brno
Místo konání akce
Černá Hora
Datum konání akce
2. 6. 2015
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
—