Magneto-optická štruktúra AlN/Fe/AlN optimalizovaná pre operácie vo fialovej oblasti

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216208%3A11320%2F08%3A00100752" target="_blank" >RIV/00216208:11320/08:00100752 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Magneto-optical AlN/Fe/AlN structures optimized for operation in the violet spectral region

Popis výsledku v původním jazyce

The magneto-optical (MO) polar Kerr response of AlN/Fe/AlN/Cu/Si structures was optimized for a wavelength of 410 nm. Prior to the growth of the structures, the optimal thicknesses of the individual layers were determined by modelling to find the maximumMO figure of merit. Then the structures with different thicknesses of AlN layers were grown by sputtering. The optical properties of the AlN layers, grown by reactive sputtering, were characterized by ellipsometry. The MO polar Kerr spectroscopy was employed to measure the performance of the structures in the field of 3 kOe. The MO signal was scaled for saturation (factor 7) and saturation azimuth rotation greater than 20° was observed. The agreement between calculation and experimental data was remarkable, verifying the correct set of optical and MO parameters used in the model. These results provide a guide for the design of a MO sensor with optimal performance at a desired wavelength.

Název v anglickém jazyce

Magneto-optical AlN/Fe/AlN structures optimized for operation in the violet spectral region

Popis výsledku anglicky

The magneto-optical (MO) polar Kerr response of AlN/Fe/AlN/Cu/Si structures was optimized for a wavelength of 410 nm. Prior to the growth of the structures, the optimal thicknesses of the individual layers were determined by modelling to find the maximumMO figure of merit. Then the structures with different thicknesses of AlN layers were grown by sputtering. The optical properties of the AlN layers, grown by reactive sputtering, were characterized by ellipsometry. The MO polar Kerr spectroscopy was employed to measure the performance of the structures in the field of 3 kOe. The MO signal was scaled for saturation (factor 7) and saturation azimuth rotation greater than 20° was observed. The agreement between calculation and experimental data was remarkable, verifying the correct set of optical and MO parameters used in the model. These results provide a guide for the design of a MO sensor with optimal performance at a desired wavelength.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

BM - Fyzika pevných látek a magnetismus

OECD FORD obor

—

Projekt

<a href="/cs/project/GA202%2F06%2F0531" target="_blank" >GA202/06/0531: Reflexní a vlnovodné jevy v magnetických nanostrukturách</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2008

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Physics. D. Applied Physics

ISSN

0022-3727

e-ISSN

—

Svazek periodika

41

Číslo periodika v rámci svazku

155007

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

7

Strana od-do

—

Kód UT WoS článku

000257839700016

EID výsledku v databázi Scopus

—