TECHNICAL-ECONOMICAL EVALUATION OF PLYWOOD BONDING

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F13%3A63832" target="_blank" >RIV/60460709:41310/13:63832 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

TECHNICAL-ECONOMICAL EVALUATION OF PLYWOOD BONDING

Popis výsledku v původním jazyce

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the pine three-ply plywood of 4 mm thickness was used. The test samples of 100 x 25 mm size were cut out from a semi-product of 2240 x 1220 mm size in the direction of its longer side (incline 0°), in the inclined direction (incline 45°) and in the direction of its shorter side (incline 90°). The bonding was carried out using seven differentdomestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally the technical-economical evaluation of the experiments was executed.

Název v anglickém jazyce

TECHNICAL-ECONOMICAL EVALUATION OF PLYWOOD BONDING

Popis výsledku anglicky

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the pine three-ply plywood of 4 mm thickness was used. The test samples of 100 x 25 mm size were cut out from a semi-product of 2240 x 1220 mm size in the direction of its longer side (incline 0°), in the inclined direction (incline 45°) and in the direction of its shorter side (incline 90°). The bonding was carried out using seven differentdomestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally the technical-economical evaluation of the experiments was executed.

Druh

D - Stať ve sborníku

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013

ISBN

978-80-213-2388-9

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

100-105

Název nakladatele

Czech University of Life Sciences Prague

Místo vydání

Prague

Místo konání akce

Prague

Datum konání akce

3. 9. 2013

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000345059700018