Technical-economical evaluation of beech plywood bonding

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F14%3A64211" target="_blank" >RIV/60460709:41310/14:64211 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Technical-economical evaluation of beech plywood bonding

Popis výsledku v původním jazyce

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the beech three-ply wood of 4 mm thickness was used (according to CSN EN 636). The test samples of 100x25 mm size were cut out from a semi-product of 2500x1250 mm size in the direction of its longer side (incline 0o), in the inclined direction (incline 45o) and in the direction of its shorter side (crosswise - incline 90o). The bonding was carried out using seven different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curingthe bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally the technical-economical evaluation of the experiments was executed.

Název v anglickém jazyce

Technical-economical evaluation of beech plywood bonding

Popis výsledku anglicky

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the beech three-ply wood of 4 mm thickness was used (according to CSN EN 636). The test samples of 100x25 mm size were cut out from a semi-product of 2500x1250 mm size in the direction of its longer side (incline 0o), in the inclined direction (incline 45o) and in the direction of its shorter side (crosswise - incline 90o). The bonding was carried out using seven different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curingthe bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally the technical-economical evaluation of the experiments was executed.

Druh

D - Stať ve sborníku

CEP obor

JS - Řízení spolehlivosti a kvality, zkušebnictví

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

13th International Scientific Conference on Engineering for Rural Development 2014

ISBN

—

ISSN

1691-3043

e-ISSN

—

Počet stran výsledku

6

Strana od-do

168-173

Název nakladatele

Latvia University of Agriculture

Místo vydání

Jelgava

Místo konání akce

Jelgava

Datum konání akce

29. 5. 2014

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—