Bonding of plywood

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F16%3A72746" target="_blank" >RIV/60460709:41310/16:72746 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.17221/39/2015-RAE" target="_blank" >http://dx.doi.org/10.17221/39/2015-RAE</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.17221/39/2015-RAE" target="_blank" >10.17221/39/2015-RAE</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Bonding of plywood

Popis výsledku v původním jazyce

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard ČSN EN 1465. The spruce three-ply wood of 4 mm thickness was used for bonding according to ČSN EN 636. The test samples of 100 x 25 mm size were cut out from a semi-products of 2440 x 1220 mm size in the direction of its longer side, in the oblique direction and it the direction of its shorter side. The bonding was carried out using eight different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing, the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally, the technical-economical evaluation of the experiments was carried out.

Název v anglickém jazyce

Bonding of plywood

Popis výsledku anglicky

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard ČSN EN 1465. The spruce three-ply wood of 4 mm thickness was used for bonding according to ČSN EN 636. The test samples of 100 x 25 mm size were cut out from a semi-products of 2440 x 1220 mm size in the direction of its longer side, in the oblique direction and it the direction of its shorter side. The bonding was carried out using eight different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing, the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally, the technical-economical evaluation of the experiments was carried out.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JS - Řízení spolehlivosti a kvality, zkušebnictví

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Research in Agricultural Engineering (Zemědělská technika)

ISSN

1212-9151

e-ISSN

—

Svazek periodika

62

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

198-204

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—