Spruce plywood bonding

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F15%3A68952" target="_blank" >RIV/60460709:41310/15:68952 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Spruce plywood bonding

Popis výsledku v původním jazyce

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the spruce three-ply wood of 4 mm thickness was used (according to CSN EN 636). The test samples of 100 x 25 mm size were cut out from a semi-product of 2440 x 1220 mm size in the direction of its longer side (angle 0°), in the oblique direction (angle 45°) and in the direction of its shorter side (crosswise - angle 90°). The bonding was carried out using eight different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally the technical-economical evaluation of the experiments was carried out.

Název v anglickém jazyce

Spruce plywood bonding

Popis výsledku anglicky

The contribution contains results of bonded joints strength tests. The tests were carried out according to the modified standard CSN EN 1465 (66 8510). For bonding the spruce three-ply wood of 4 mm thickness was used (according to CSN EN 636). The test samples of 100 x 25 mm size were cut out from a semi-product of 2440 x 1220 mm size in the direction of its longer side (angle 0°), in the oblique direction (angle 45°) and in the direction of its shorter side (crosswise - angle 90°). The bonding was carried out using eight different domestic as well as foreign adhesives according to the technology prescribed by the producer. All used adhesives were designated for wood bonding. At the bonding the consumption of the adhesive was determined. After curing the bonded assemblies were loaded using a universal tensile-strength testing machine up to the rupture. The rupture force and the rupture type were registered. Finally the technical-economical evaluation of the experiments was carried out.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JS - Řízení spolehlivosti a kvality, zkušebnictví

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

15

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

285-291

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—